PF1210 Impact crusher shipping again

Feeding size: 400x1080mm

Outputs size: <60mm

Capacity: 80-130 tph

Motor power: 110kw

 

When the impact crusher works, the stone falls directly from the upper part of the machine into the high-speed rotating turntable. The rotor rotates at a high speed under the drive of the motor. The material entering from the feed inlet collides with the plate hammer on the rotor. Under the action of high-speed centrifugal force, The other part of the flying stone shunted around the turntable in an umbrella-shaped way produced high-speed collision and high-density crushing. It was crushed by the high-speed impact of the hammer; the crushed material was returned to the lining board and was crushed again, and the stones hit each other. After that, eddy current movement will be formed between the turntable and the casing, causing multiple mutual striking, friction, crushing, and finally discharged from the discharge port. In this way, a closed circuit is formed for many cycles, and the gap between the impact frame and the rotor frame can be adjusted to achieve the purpose of changing the material discharge particle size and material shape.